* Replace sysmodule enums with table
Dumped this from the 12.52 module, using a script I created.
* Better documentation
* Separate from system libraries
That system folder is going to be getting quite large if I left all the sysmodule stuff in there.
* More arrays from library
* Found another preload list
Ghidra really hates decompiling libSceSysmodule, so I didn't notice this one at first.
Also documented specific versions tied to each preload list.
* Start work on implementation
* Some basic implementations
* Initial stub for module loading
Just enough to see if the logic functions appropriately.
* Clang
* sceSysmoduleLoadModule
Now I need to get sceSysmodulePreloadModuleForLibkernel done so that we don't have bugs from not loading internal LLEs.
* sceSysmoduleLoadModuleInternal
* sceSysmodulePreloadModuleForLibkernel
I have successfully broken quite literally everything.
I shall debug this tomorrow.
* Slight fix
* Maybe fix?
* Change log
Enjoy the log spam 😄
* Increased defined stub count
Now that libc and libSceLibcInternal loads later, all the auto stubs are getting consumed by it.
* sceSysmoduleUnloadModule stub
Also a couple fixes. Sysmodule does pass argc and argv to game modules, but only after loading them once to check binaries.
Shouldn't matter for the most part.
* Clang
* Less stubs
2 thousand is seemingly enough.
* sceSysmoduleLoadModuleInternalWithArg
Doesn't hurt to have, since Apex Legends calls it.
* Oops
* Oops 2
* Rename isModuleLoaded to getModuleHandle
Review comment
* Remove debug game module loads
These cases only trigger when specific sceRegMgr key values are set, and for our purposes, we can treat that case as false.
* Allow preloading to fail
For kalaposfos
* Clang
* PngEnc hle
* format
* formatting + fix scePngEncDelete
* fix cmake + misc improvements
i think the setjmp is right according to the libpng manual, works fine from my testing
* fixes
fix an issue with how alpha was handled, and PngEncode() now properly sets the processed_height in outputInfo.
* format
* Update pngenc.cpp
* set outputInfo->processed_height during png write
i assume some games will use this for error handling
* added libSceAudiodec to lle modules list
* crappy float resample , use it at your own risk
* clang
* adjustments to aac
---------
Co-authored-by: Vladislav Mikhalin <mikhalinvlad@gmail.com>
* Run libSceRtc LLE
The more we've used our HLE, the more issues we've had with it.
While we debug these bugs, re-enabling LLE will address any regressions the swap caused.
* libSceJpegDec LLE
Needed for Trackmania until we implement HLE for this library
* libScePngEnc LLE
Needed for Minecraft until we implement HLE for this library
* Update documentation appropriately
* libSceJpegEnc LLE
By @georgemoralis's request
* Earlier initialization of elf info.
Everything used for elf info initialization comes from the param.sfo, so we can initialize this earlier to have this information accessible during memory init.
* Extract compiled SDK version from pubtoolinfo string
Up until now, we've been using the game's reported "firmware version" as our compiled SDK version. This behavior is inaccurate, and is something that has come up in my hardware tests before.
For the actual compiled SDK version, we should use the SDK version in the PUBTOOLINFO string of the param.sfo, only falling back on the firmware version when that the sdk_ver component isn't present.
* Store compiled SDK version in ElfInfo
* Limit address space for compiled SDK version at or above FW 3
Sony placed a hard cap at 0xfc00000000, with a slight extension for stack mappings. For now, though stack mappings aren't implemented, there's no harm in keeping a slightly extended address space (since this cap is lower than our old user max).
Limiting the max through address space is necessary for Windows due to performance issues, in the future I plan to properly implement checks in memory manager code to properly handle this behavior for all platforms.
* Use compiled SDK version for sceKernelGetCompiledSdkVersion
I think this is pretty self explanatory.
* Log SDK version
Since this value is what most internal firmware version checks are against, logging the value will help with debugging.
* Update address_space.cpp
* Update emulator.cpp
* Backwards compatible logging
Because that's apparently an issue now
* Add support for restarting the emulator with new configurations
- Implement `Restart` function in `Emulator` to enable process relaunch with updated parameters.
- Modify `sceSystemServiceLoadExec` to use the restart functionality.
* Add logging for emulator restart and system service load execution
* Add IPC emulator PID output command
Impl `PID` output command to return the emulator process ID
- required for launches supporting emulator restart
* Add log file append mode support (used after restarting to keep the same log file)
* Keep game root between restarts
* add --wait-for-debugger option flag
* add --wait-for-pid flag
used for sync between parent & child process during restart
* impl restart via ipc
* fix override game root
* add qt flags to allow restart
* Open settings dialog from context menu
* initial version complete
* add context menu item to delete game config if it exists
* Create game config from base value instead of default value
* Require confirmation before deleting game configs with menu item
* fix rebase
* Reset game specific values when creating a new game config
* Add icon for entries with game config
* clang format
* Add submenu for game-specific settings
* Log if game-specific config exists, remove hidden tab from tab selection
* Add other experimental options to game-specific GUI
* clang format
* Add flag to specify if game-specific file needs creation
* refactor: remove additional arguments, reset game-specific status on save instead
* Fix return
* cleanup - remove unneeded load
* Set tab to general if hidden tab is set as default
* Cleanup variable names and strings, default tab fix, volumeslider fix
* cleanup: missed a couple of variables to standardize
* More readable way to reset volume slider
* Np library cleanup
Moved all Np libraries to a Np folder, created files for Np error codes and structs shared between the libraries, removed empty auto-generated stubs from NpCommon and NpManager, and more things of that nature.
Also implemented sceNpGetAccountCountry, since we already had sceNpGetAccountCountryA anyway.
* Cleanup NpManager signed_out checks
The PR that introduced the PSN signed in status reverted some of the changes I'd previously made to improve accuracy.
Also they missed sceNpHasSignedUp, which just uses an internal variant of sceNpGetState for it's own check.
* Copyright dates
* Move signin check to NpManager RegisterLib
Hardcoding it the way I did caused it to read signin status before config was read.
* Fix RegisterLib names
Not sure why these weren't adjusted yet, so I've adjusted them myself.
* Fix NpCommon exports
* Basic parameter validation in sceNpDeleteRequest and sceNpCreateRequest
* More thorough request logic
Created an enum to capture the current state of each request, using a vector to store them.
I've made 3 states, none represents deleted requests, active represents requests that were made, but haven't been used yet, and complete represents used requests (a request cannot be used for multiple functions).
* Functions
sceNpCheckAvailability, sceNpCheckAvailabilityA, sceNpCheckNpReachability, sceNpGetAccountDateOfBirth, sceNpGetAccountDateOfBirthA added.
* sceNpGetAccountLanguage, sceNpGetAccountLanguageA
* sceNpGetGamePresenceStatus, sceNpGetGamePresenceStatusA
Also reduced debug logging for functions with early signed out returns, since those should behave identically to real hardware so long as you keep PSN emulation disabled.
* Fix sceNpGetAccountLanguage parameters
Oops
* sceNpGetNpReachabilityState
* sceNpGetParentalControlInfo, sceNpGetParentalControlInfoA
* Move OrbisNpState back to np_manager.h
Until this sees use elsewhere, this doesn't need to be with np-wide things.
* Clang
* poc
* Set up variable game specific variable copies
* Set up getters to return the game specific option if it exists
* Avoid exceptions if a value isn't in the config
* Make sure the custom configs folder exists
* Update + review comments + rewrite
* The loathsome clang-formatter
* Specify which getter/setter is used everywhere
* Initial work
* More work
* More stuff
* Update hmd.cpp
* Separate Reprojection and Distortion functions
Mainly doing this to clean up the code, since these sub-libraries are fairly self-contained.
* Fix weird Git issue
* Improve error documentation
After thorough decompilation, it seems clear that Sony didn't really put much thought into how libSceHmd behaves with no headset connected.
* Fix sceHmdGet2DEyeOffset
* Update hmd.cpp
* Add sceHmdInternalGetDeviceInformation and sceHmdInternalGetDeviceInformationByHandle
Based entirely off decompilation, these two functions are internally the cause of much of my trouble with this library.
They're also called by libSceVrTracker, but I don't think we'll be LLE'ing that anytime soon.
* Cleanup
* sceHmdGetAssyError
Struct isn't fully decompiled, but since it goes entirely unused when PSVR is disconnected, it doesn't matter too much.
I'm pretty certain it's 4 floats though, based on what I've decompiled of this function.
* More organization and fixes
* sceHmdGetInertialSensorData
Behavior should be fully accurate, but I've left the stub log since I haven't decompiled the parameters properly.
Also gave NID aTg7K0466r8 a proper name, based on what I've seen while decompiling. It behaves identically to sceHmdGetInertialSensorData, but with a slight difference in the params used for an internal function call.
* Update hmd.cpp
* Revert name change
* Organizational changes
These two functions modify internal variables used exclusively by reprojection functions.
* Remove internal device information calls
* Log PSVR-related attributes from param.sfo
Would mainly be helpful for compatibility list moderation, since these notices will be much more reliable for games that crash instantly.
* Remove unnecessary includes
* cpu info
Update cpu_info.h
Revert "Update cpu_info.h"
This reverts commit 6db3814e7f8162ca546c33479942d7204524b281.
Revert "cpu info"
This reverts commit cfecdf694fd7bee0fdf025c3933ff7b9498a1c3f.
hardware info
* log OS
* Round RAM, add space
* switch temporarily to local fork
* Update CMakeLists.txt
* set shallow = true for submodule
* Log logical cores as well
* point submodule to shadps4 fork
* Add stubbed libkernel time functions
* Implement remaining stubbed Rtc functions
* Move Rtc from the optionally HLE loading part to the always loaded part
* Remove Rtc from the README list of LLE modules
* Mfw last second hotfix I noticed while double checking that everything's good before opening the PR
* Config entry isConnectedToNetwork
* Respect Config::isConnectedToNetwork when returning connection state
* Return connection status in NetCtlGetInfo
* Print connection data in log
* buffer_cache: Handle inline data to flexible memory
* control_flow: Fix single instruction scopes edge case
Fixes the following pattern
v_cmpx_gt_u32 cond
buffer_store_dword value
.LABEL:
Before
buffer[index] = value;
After
if (cond)
{
buffer[index] = value;
}
* vector_memory: Handle soffset when offen is false
When offen is not used we can substitute the offset argument with soffset and have it handled correctly
* scalar_alu: Handle sharp moves with S_MOV_B64
This fixes unable to track sharp errors when this pattern is used in a shader
* emulator: Add log
* video_core: Bump binary info search range and buffer num
* added recentFiles save/load
* gui language
* fixups for language
* fixed language issue with savedata (it was saving based on gui language and not on console language)
* clang fix
* elf dirs added
* added theme
* Proper handling of whence 3 & 4
* Accurate directory handling in open
Directories can be opened, and can be created in open, these changes should handle that more accurately.
* Mount /app0 as read only
On real hardware, it's read only.
* Proper directory flag handling.
Even when directory is specified, it will still succeed to open non-directories.
* Check for read only directories
* Earlier ro check in posix_rmdir
Hardware tests suggest these checks are in a different order
* Clear temp folder on boot
My tests rely on this, and some games do too.
Two birds with one stone
* Clang
* Add missing DeleteHandle calls
Whoops
* Final flags adjustment in sceKernelOpen
All my current tests are now hardware accurate.
* Fix truncates
Host ftruncate consistently fails on EINVAL, I'll need to test if this issue affected Windows too.
* Windows hacks
Windows is more limiting about how folders are opened and things like that. For now, pretend these calls didn't error.
Also fixes compilation for Windows
* Final touch-ups
After expanding my test suite further, I found a couple more edge cases that needed addressing.
Bloodborne audio is still broken, I'll look into that soon.
* Remove hacky read-only behavior in posix_stat
Bloodborne apparently uses the mode parameter here when querying it's audio files, and the mode we returned led to it disabling audio entirely.
* Clang
* Cleaner code
* Combine fsync and sync flags
According to FreeBSD docs, the "sync" flag is synonymous with the fsync flag, and is only included to meet the POSIX spec.
* Log if any currently unhandled flags are encountered.
These are rare and probably not too important, but log a warning when they're seen.
* Update file_system.cpp
* Update file_system.cpp
* Clang
* Revert truncate fix
Using ftruncate works fine after moving the call to before the proper file opening code.
* Truncate before open
Open the file as read-write, then try truncating.
This fixes read | truncate flag behavior on Windows.
* Slightly adjust check for invalid flags
Any open call with invalid flags should return EINVAL, regardless of other errors parameters might cause.
* rewrite splash
removed Splash class
rewrite using imgui texture manager
fix crashes & old validation error
* handle games with abnormal aspect ratios
